View this email in your browser
Most of the time, you can't detect roof damage from the ground, but if you see either of these, call us! If you have an active leak, you're our top priority!

Meet our Account Executive, Mike!
Michael Ellis started with Dehlinger in May of 2018. He has an extensive background in sales and “C” level management positions in various industries: real estate, construction, and consulting. One of the things that matter most to him regarding his work ethic is that he would best be described as “high performance/low maintenance.” His goal is to make everyone’s life that he touches on a day to day basis: family, customers, and fellow staff at Dehlinger, a little bit better.
Thanks for everything you do, Mike! You are a valuable asset to our team!


The average lifespan of an asphalt shingle roof is between 15 and 18 years. If you want yours to last a long time, then consider architectural asphalt roofs. On the other hand, if you are tight on money, then consider a three-tab asphalt roof. Regardless of the type of asphalt roof, there are common problems that occur with asphalt roofs. Learning about them may help you decide if you need to hire roofers in Longwood to install a new one soon.


Commonly occurring within the first year of having a new asphalt roof installed, blistering looks like a pocket-forming on your roof. They are usually tiny, but there may be more than one of them. Eventually, the top of the blister breaks off, leaving a pockmark. Blisters are a sign that volatiles are flashing out of the asphalt. While incorrectly mixed ingredients or improperly made fiberglass mats still cause some blisters, they are more commonly caused by overheated roofs or poor roof ventilation. Even in severe cases, blistering will not make a roof leak; however, it may not look as beautiful as you wanted it to look.


Flaking is the delamination of the upper layer of the asphalt shingle. It is easy to think that a hailstorm caused flaking because the damage looks very similar to the untrained eye. Flaking happens when the bond coating and the saturated coating move at different rates. It is commonly caused by variations in moisture levels in Longwood’s atmosphere. While it is not as common in Florida, it can also be caused by drastic changes in temperature.


If you look at an asphalt roof where the shingles are cupping, you will discover that the center of the shingle is lower than the two outside edges. This causes the shingle to look like a cup, and water can collect in these cups. It can be caused by the manufacturer’s binding washing off too early. It is more commonly caused by poor roof ventilation or by extreme changes in the weather. Poor storage of the shingles before they were placed on your roof can also cause some cupping.


If you notice the edges of your shingles staying flat while the middle is rising, then your shingles are clawing. The same conditions that cause cupping can cause clawing on other roofs. When water can get under the middle of your asphalt shingles, then there is a strong probability that your roof will leak.

Contact Dehlinger Construction to look at your roof. Their experienced team can help you understand what is going on with your asphalt shingles and recommend solutions to you. They have over 60 years of combined experience in construction. They earnestly desire to be your “go-to” source for all your home and business construction needs.

Copyright © 2019 Dehlinger, All rights reserved.

Certified General, Residential, & Roofing Contractor
#CGC1508013 | #CRC1331934 | #CCC1331442

Want to change how you receive these emails?
You can update your preferences or unsubscribe from this list.